• Approved by MERCEDES-BENZ (trucks) and PORSCHE
• For fast, gentle and easy fitting and demounting of all standard tyre/rim combinations
• Chemically neutral with respect to rubber and metal
• Excellent lubrication for mounting and demounting operations = fewer injuries
• Promotes adhesion between rim and tyre, prevents tyre slippage
• Non-spattering

• Facilitates mounting and demounting of extremely wide tyres on standard tyre changers
• Increased lubrication at the beginning of the mounting operation
• Fast-drying and non-spattering

• Durably seals minor leaks where the bead is seated on the rim
• Proven tyre mounting paste with additional bead sealing properties
• Ideal for mounting retreads or tyres on old rims

• For all standard mounting applications on two-wheel vehicle and car tyres
• Becomes transparent when dry

• For all standard mounting applications to car and truck tyres
• Cost-effective for big order quantities

• Specially formulated for reliable and clean mounting of premium low-profile tyres and modern wheel systems such as PAX, RFT, SST and UHP (Ultra High Performance)
• Sprayable solution with high initial sliding effect which reduces the seating pressure
• Dries quickly, ensuring that the tyre is safely seated on the rim
• Reduces the risk of clogging pressure sensors on the wheel
• Economic usage, not harmful to the environment
• Transparent fluid, dries without leaving visible residues on tyre or wheel

• Demounting-Fluid with excellent flow properties for demounting tyres which are stuck on their rims
• Demounted tyre stays completely serviceable
• REMA TIP TOP Demounting-Fluid does not attack the rubber structure of the beads
• Free from mineral oil
• Extremely economical

Caution:
Because of its high lubricating effect, Demounting-Fluid must not be used for mounting purposes. The tyre may slip off the rim when rolling!

• For removing residue left by adhesive weights on the rim, or for pre-cleaning the weight placement areas on the rim
• REMAXX EXive has been specifically developed to remove residue without damaging modern rims
• Easy removal of previously softened up dirt using plastic scraper
• Neutral to rubber and metals

• Liquid mounting agent, especially for agricultural tyres
  Caution:
• Concentrate to be diluted with water at a ratio of 1:5

• Bead bonding agent on resin base
• Applied with a brush to the cleaned rim seat and tyre bead before mounting
• Do not additionally use a mounting agent such as mounting paste or mounting fluid
• The tyre is then mounted within up to 30 minutes before REMAXX ANTI-GLISS LUBE dries, leaving a viscous bonding coat

• Liquid lubricant for easy mounting of SE and SIT tyres
• Effective, long-lasting gliding film
• Reduces the pressure required to mount the tyre

• Spreadable sealant for sealing leaks caused by ageing or wear on the beads
• Applied to the bead and bead seat before the tyre is inflated
• During inflation the solid matter contained in the solution is pressed into the uneven areas and seals them

Safety instruction:

• As REMAXX BEAD SEALER is flammable, do not use it to fill the tyre
• Also do not use it to seal larger bead injuries caused during tyre mounting, cuts extending to the fabric etc.

• Can be used as a "flexible pump ring" for all tyre mounting operations
• Stiff paste with stable viscosity to seal the gap between tyre bead and rim edge